Wednesday, April 30, 2014

Teensy 3* Development Board & Arduino Shield



I needed a breakout board to access all the [Teensy](https://www.pjrc.com/teensy/teensy31.html) 3 and 3.1 pins, and I needed a board to plug Arduino shields with the Teensy. This board is not "Teensy" small but has a lot of space to design many circuits. All the Teensy pins from #1 to #33, VBAT, Program, A14/DAC or Reset on Teensy 3.0 are connected.
Finally there is a lot of space left open for prototyping.
First I ordered a few boards for myself, and found them very useful to convert the unique breadboard prototypes I have for many projects around the house into more permanent installations. 


I thought this device could be a good candidate to experiment with Tindie, so I started a shop for it and will report about this adventure in e-commerce when I have a bit more feedback. There are a lot more details about this board in Tindie.
I sell on Tindie

5 comments:

  1. Dear sir,
    I am looking for a suitable Beaglebone proto/add-on cape with more space and flexibility for development.
    Fortunately, I just found your esteemed product on Tindie, "PCBs and accessories for PetitStudio products"(https://www.tindie.com/products/freto/pcbs-and-accessories-for-petitstudio-products/) - an excellent design with P8/P9 signal replicate pins, the 6 debug headers, Serial, RGB, SOT23 & more space; but finally find out it connects all the row pin holes like a student breadbord- it severely limits components to add-on & capability for development.
    Can you cut those row connection lines out, and if possible also the GND & 3v3 lines' connections(consuming/wasting total 50 pin holes) by P8, to make it have more space & flexibility to use like the BeagleBone proto cape?
    By the way, I intend to order 5 pieces, or including 2x25 socket. Thank you in advance. Look forward to hearing your kind response.
    Best regards,
    Cha
    p.s. my email: whitengee@gmail.com

    ReplyDelete
  2. Really effective post for Development Boards i am really impressed to this post because its all information is really very nice and helpful.

    Transfer Switch Power Cord

    ReplyDelete
  3. I am really impressed to this post because its all information is really informative for all users.

    Locking Adapter

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete